Peavey GPS Series Operating Manual page 12

GPS 900/1500
150VAC Units Only
To Additional Amplifier Input
Channel B Input Source
Channel A Input Source
To Additional Amplifier Input
All other GPS Models
To Additional Amplifier Input
Channel B Input Source
Channel A Input Source
To Additional Amplifier Input
™
GPS
Recommended Connection for Stereo Mode
NOTE: Always use a balanced input source if available.
Series Amplifiers
SP
DTH
12
™ 7G
SP ™ 7G
NOTE: Minimum Load
Impedance is 2 Ohms.
1/4" jacks are wired in parallel
with binding post.
Tip = Positive
Ring = Negative
® 4215F
DTH ® 4215F
NOTE: Minimum Load
Impedance is 2 Ohms.
Speaker connectors are wired in
parallel with binding posts.
Pins (1+) and (2+) are wired positive.
Pins (1-) and (2-) are wired negative.