Advertisement
Quick Links
Advertisement
Related Manuals for punch PMX-2
Summary of Contents for punch PMX-2
- Page 1 DIGITAL MEDIA RECEIVER PMX-2...
- Page 2 • Consult the dealer or an experienced radio/TV technician for help ©2015 Rockford Corporation. All Rights Reserved. PUNCH® and associated logos where applicable, are registered trademarks of Rockford Corporation in the United States and/or other countries. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth ®...
- Page 3 Specifications Model PMX-2 Operating Voltage 10.5V - 16V Fuse Rating 25 W X 4 @ 4 Ohms RMS Power Output 50 W x 4 @ 2 Ohms Peak Max. RCA Output Voltage Output Impedance 500Ω Frequency Response 20 - 20kHz FM Frequency Range 87.5MHz - 107.9MHz...
- Page 4 Design Features Rotary Encoder REV / FWD button This knob is for adjusting main volume, zone volumes, Use this button to skip back and forward menu navigation and setting adjustments. through channels or tracks with a short press. Long pressing will activate manual seek mode. MENU button This button gives you access to the main settings of the unit by long pressing.
-
Page 5: Wiring Diagram
Wiring Diagram BLACK BLACK RADIO ANTENNA RED (REAR LINE OUT RIGHT OR SUB-W OUT) BLACK WHITE (REAR LINE OUT LEFT OR SUB-W OUT) GREY RED (FRONT LINE OUT RIGHT) WHITE (FRONT LINE OUT LEFT) RED (AUX IN RIGHT) WHITE (AUX IN LEFT) BLACK WIRED REMOTE 13DIN FEMALE... - Page 6 Installation / Mounting Contents Mounting (Using Mounting Plate) • Source Unit • Screws To mount the unit, you will need to find a flat surface with adequate clearance behind it that provides enough clearance for the unit and all it’s necessary wiring. •...
-
Page 7: Basic Operation
(0-12). Short press MENU to exit and go back up one level. volume level will be displayed during adjustment. Punch EQ is an onboard equalizer with up to +18dB @ 45Hz and/or up to +12dB boost at 12.5kHz... - Page 8 Settings AUTO STORE ADJUSTING THE SUBWOOFER OUTPUT Press the SUB + or SUB- buttons to adjust the output level (0-20). Short press the encoder button to access the AUTO STORE function. You will need to be under the PRESET group you want to adjust first (FM1>FM2>FM3). ADJUSTING THE SCREEN BRIGHTNESS This feature automatically stores presets on the unit.
-
Page 9: Aux Operation
Operation ADD PRESETS Short press the encoder button on the ADD PRESETS option. You will need to be on both the station you want to add first. Using this feature allows you to save stations to the unit. Once selected, use the rotary encoder to select the PRESET number (1-6) you want the station saved to. - Page 10 Operation ® Pandora ® This feature allows you to control the Pandora app from the source unit directly (Android users will have to use Bluetooth only, iOS users can use both USB and ® Bluetooth). You will need to start the Pandora app on your device first, then ®...
-
Page 11: Troubleshooting
Troubleshooting Symptom Diagnosis Remedy Basic Blown fuse Check fuse of the unit, replace with correct rating. If connected following the instructions, the unit will not Vehicle’s ignition is off operate with ignition off. Source unit does not turn on. Check battery, connections and fuses and repair or replace Voltage applied to Red wire is not between 10.5 &... - Page 12 Warranty Rockford Corporation offers a limited warranty on Rockford Fosgate products on the following terms: Length of Warranty POWER Amplifiers – 2 Years ® Direct Fit Speakers – 2 Years Source Units – 1 Year All other products – 1 Year Any Factory Refurbished Product –...
- Page 13 Installation assistance available at: www.rockfordfosgate.com/rftech 600 South Rockford Drive • Tempe, Arizona 85281 United States Direct: (480) 967-3565 • Toll Free: (800) 669-9899 R O C K F O R D F O S G A T E . C O M...
Need help?
Do you have a question about the PMX-2 and is the answer not in the manual?
Questions and answers