Commissioning The Machine; Switching The Machine On/Off - Pfaff 1181 Instruction Manual

8

Commissioning the machine

.03
Fig. 8 - 07
8

Switching the machine on/off

.04
● Switch the machine on (see Chapter 7.01, On/off switch).
Do not operate the machine if there is any discrepancy.
The machine may only be connected to an earthed socket!
Have home position of the machine drive verifi ed by certifi ed technicians
before fi rst commissioning! Have settings carried out my technicians where
required (see chapter 8.05)
Installation and commissioning
● Check the machine, especially the electri-
cal leads, for any damage.
1
● Remove pin 1 of the oil reservoir 2
(Fig. 8 - 07).
2
The pin serves only to protect
the machine from damage
during transport and must not
be used when sewing.
● Clean the machine thoroughly and oil it
(see chapter 10 Care and maintenance).
● Have skilled personnel check if the ma-
chine can be operated with the available
mains voltage
23