Pentair CD-15G Installation And User Manual page 7

5
Figure 5a: Component Locations (ALL MODELS EXCEPT 521761 and 521762)
Relay Panel
Remove jumper if ORP controller or dissolved
ozone monitor is used. Connect dry contact
leads from controller/monitor or leave open
if 5 pin external interface connector is used.
Remove jumper and connect dry contact leads
if external device is used. (ambient ozone, flow
switch, etc.)
Figure 5b: Connection Details for External Control Devices (ALL MODELS EXCEPT 521761 and 521762)
INTELLIZONE™ COMMERCIAL OZONE GENERATOR Installation and User's Guide