Drain Pan, Storage Bin, Front Panel (Upper); Ice Station Drain Trap - Hoshizaki DIM-30DE-1 Service Manual

3. DRAIN PAN, STORAGE BIN, FRONT PANEL (UPPER)

1) Follow the steps 1) to 3) in "III. 2. PREPARING THE ICE DISPENSER FOR LONG
STORAGE."
2) Pull out the drain pan hose from the drain hole in the storage bin.
3) Remove the thumbscrew at the front, and take out the drain pan from the storage bin.
4) Soak the drain pan in warm water containing a neutral cleaner for at least 3 minutes.
Rinse thoroughly with clean water.
5) Wipe the backside of the front panel (upper) with a damp cloth containing a neutral
cleaner. Use a clean damp cloth to wipe off the cleaner.
6) Wash the storage bin liner with clean water.
7) Refit the drain pan and front panel (upper) in their correct
position. Run the bin control switch lead through the
recess in the drain pan.

4. ICE STATION DRAIN TRAP

1) Lightly lift the cap at the center of the ice station
and turn it counterclockwise.
2) Lift the cap straight off.
3) Soak the cap in warm water containing a neutral
cleaner for at least 3 minutes. Rinse thoroughly
with clean water.
4) Wipe the notches in the ice station with a damp
cloth containing a neutral cleaner. Use a clean
damp cloth to wipe off the cleaner.
5) Refit the cap in the ice station by fitting the tabs
in the notches.
6) Turn the cap tightly clockwise.
14
Bin Control
Switch Lead
Recess
Drain Pan
Fig. 4
Cap
Ice Station
Fig. 5
Tab
Notch
Fig. 6