Subscribe to Our Youtube Channel
Related Manuals for Ingrasys D3011E
Summary of Contents for Ingrasys D3011E
- Page 1 Quick Installation Guide D3011E Ver: v1.0...
-
Page 2: Package Contents
D3011E Quick Installation Guide v1.00 Package Contents Ceiling Mount Installation Pack Product CD D3011E Screws & Anchors Alignment Sticker Lens adjustment tool VIP Card (Optional) Quick Installation Guide Ingrasys Technology Inc. - Page 3 D3011E Quick Installation Guide v1.00 Physical Description & Connection Connections Product Front View Identify the type of network device. If the network device supports PoE (Power over Ethernet) function, simply connect the camera to it via Ethernet cable. If not, both Ethernet cable and DC adaptor should connect to device...
-
Page 4: Mounting The Camera
D3011E Quick Installation Guide v1.00 Mounting the Camera 1. Place the alignment sticker on the ceiling which was preferred and drill three holes into the ceiling for cable and screws 2. Connect and route Ethernet cable or DC cable through the ceiling (Note: remove the cable side cover once the cable route from the side) 3. - Page 5 D3011E Quick Installation Guide v1.00 Tuning the Camera 1. Push the slide lock rightward to remove the dome cover 2. Adjust tilt angle by turning tilt adjustment screws 3. Fit the lens adjustment tool to lens and tune up focus by adjustment tool 4.
-
Page 6: Assigning Ip Address
D3011E Quick Installation Guide v1.00 Assigning IP Address Launch Ingrasys Discovery Tool (IngrasysDiscovery.exe). The tool will start searching and then displaying the cameras on the Device List after they are found. Check the checkbox to select a camera device from the list. -
Page 7: Accessing The Camera
D3011E Quick Installation Guide v1.00 Accessing the Camera Launch IE browser and input the IP address of the camera, or click on “Browse” button on Discovery Tool. The web page with video will then be shown as below. The live video of the camera can be played with a RTSP player, such as VLC or QuickTime. The network URL is rtsp://Camera IP/stream1. - Page 8 D3011E Quick Installation Guide v1.00 Wireless Setting-Manual (Note: USB WiFi Dongle as optional parts for WiFi function) If the network device supports PoE function, simply connect the camera to it via Ethernet cable. Otherwise both Ethernet cable and DC cable should connect to device.
- Page 9 D3011E Quick Installation Guide v1.00 Wireless Setting-WiFi Direct Mode for mobile device Press WiFi Mode button on camera over 1 sec but less than 3 sec, Amber LED turns on. The camera will act as a WiFi AP at meantime.
- Page 10 D3011E Quick Installation Guide v1.00 Wireless Setting-WiFi Direct Mode for mobile device 3. Access the camera web page http://192.168.1.1/mobile by browser or scan the QR code as below Enter to “WiFi setting” to type in the SSID and shared key same as what set on your WiFi router/AP and click the save button The camera WiFi will switch back to client mode and link with the configured WiFi router/AP automatically.
- Page 11 D3011E Quick Installation Guide v1.00 Wireless Setting-WPS Function Press the WPS (WiFi Protected Setup) button on your WiFi router/AP to trigger connection function Press WiFi mode button on camera over 3 seconds then LED1 and LED2 starts to flash (the Amber LED and...
- Page 12 Ingrasys Technology Inc.
Need help?
Do you have a question about the D3011E and is the answer not in the manual?
Questions and answers