Table of Contents
Advertisement
Quick Links
655 EisEnhowEr DrivE
owatonna, Mn 55060-0995 Usa
PhonE: (507) 455-7000
tEch. sErv.: (800) 533-6127
orDEr Entry: (800) 533-6127
intErnational salEs: (507) 455-7223
Fax: (507) 455-7063
Saddle Low Point: 95.25 mm
Saddle High Point: 571.50 mm (22
Handle Length: 121.9 cm
The safety signal word designates the degree or level of hazard seriousness.
daNgEr: Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WarNINg: Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CautION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CautION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not
avoided, may result in property damage.
© 2001 SPX
Fax: (800) 955-8329
Fax: (800) 283-8665
Hydraulic Service Jack
Maximum Capacity: 1.8 Metric Tonnes (2 Tons)
Lifting Range: 476.25 mm (18
Explanation of Safety Signal Words
Parts List &
Operating Instructions
for:
(3
/
in.)
3
4
/
in.)
1
2
/
in.)
3
4
(48 in.)
Description:
Hydraulic service jack used to lift a
wide variety of motor vehicles.
Sheet No.
Issue Date:
Form No. 107156
1525
Original Instructions
1 of 4
Rev. G March 26, 2012
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for OTC Tools 1525
Summary of Contents for OTC Tools 1525
- Page 1 Parts List & tEch. sErv.: (800) 533-6127 Operating Instructions Fax: (800) 955-8329 orDEr Entry: (800) 533-6127 for: 1525 Fax: (800) 283-8665 intErnational salEs: (507) 455-7223 Fax: (507) 455-7063 Original Instructions Hydraulic Service Jack Maximum Capacity: 1.8 Metric Tonnes (2 Tons) Saddle Low Point: 95.25 mm...
-
Page 2: Safety Precautions
Parts List & Operating Instructions Form No. 107156, Sheet 1 of 4, Back Safety Precautions CautION: to prevent personal injury and/ or property damage, • Study, understand, and follow all safety precautions and operating instructions before using this service jack. If the operator cannot read instructions, operating instructions and safety precautions must be read and discussed in the operator’s native language. -
Page 3: Parts List
Parts List & Operating Instructions Form No. 107156 Parts List Item Part Req'd Description 529219 Saddle, Pad, Retaining Ring 511818 Decal 501817 Grease Fitting 501238 Handle Assembly 512223 Handle Return Spring 517079 Handle Retaining Bolt and Nut 501288 Caster 10236 Washer 10252 Lockwasher—19 mm (3/4 in.) -
Page 4: Replacement Kits
Parts List & Operating Instructions Form No. 107156, Sheet 2 of 4, Back replacement Kits j n jn Parts marked with an asterisk (j) are included in Seal Kit No. 512218. Parts marked with a triangle (s) are included in Pump Release Valve / U-Joint Repair Kit No. -
Page 5: Lifting Operation
Parts List & Operating Instructions Form No. 107156 Lifting Operation 1. Close the release valve by turning the handle clockwise (CW) as far as it will go. 2. Position the jack under the vehicle. CautION: to prevent equipment damage, use the manufacturer’s recommended lifting points on the chassis. -
Page 6: Maintenance
Parts List & Operating Instructions Form No. 107156, Sheet 3 of 4, Back Maintenance 1. a minimum of once a month, lubricate the moving parts of the jack upper (indicated by arrows in Figure 2). grease 2. Every three months, add grease to the upper grease nipple. Nipple 3. -
Page 7: Troubleshooting Guide
2. Replace return spring. 3. Link section is binding. 3. Lubricate link section. IMPOrtaNt PrOduCt INFOrMatION Record serial number and year of manufacture for future reference. See product identification label on unit for information. 1525 Serial Number: Year of Manufacture: Sheet No. 4 of 4 Issue Date: Rev. G March 26, 2012...
Need help?
Do you have a question about the 1525 and is the answer not in the manual?
Questions and answers