Ten Haft samysolar Installation Instructions Manual page 45

b) Solar operation:
If you press , your SamYSolar+® will switch into solar mode, and its solar panel
will follow the sun's path during the course of the day. The first thing the system
does is to determine the current position of the sun. To do this, it needs to know its
E
own position. This is obtained via a GPS receiver and an electronic compass, which
provide the required data at all times. This means that the solar panel is able to turn
towards the sun as soon as you switch the system on. If the system is disconnec-
ted from the onboard battery then this data is lost. When it is reconnected to the
onboard electric system of the vehicle and switched on again, the system first needs
to run through a short synchronisation cycle (display: „Clock sync wait") while it
gathers all the necessary information. The SamYSolar+® will not be extended during
this time. Instead, you will see the message Synchronisation in the display
while the required data are being obtained.
When the system is in solar mode, pressing once will initially switch the system
into satellite mode. To switch off and retract the system, press again.
45