Ten Haft samysolar Installation Instructions Manual page 40

Once the connections have been made correctly, the control panel performs a short
self-test and then goes into rest mode.
Then connect the cable supplying solar power (black, yellow) to a charge controller.
The following graphic shows the connection to the Solara SR 135 charge controller
supplied. This charge controller is suitable for commercially available lead-gel and
lead-acid batteries. Please observe the manufacturer's instructions if connecting
the cables to an alternative charge controller of your choice or to a onboard power
block.
Connection
of charge
controller
Solara SR135:
Yellow cable
SamYSolar+®
Laderegler / Charge controller
Art. No. SR135TL
Batteriezustand
battery status
SOLARA
Black cable
SamYSolar+®
Laden
charging
>75%
25 - 75%
<25%
Lastzustand
load status
Positive terminal
On-board battery
40
Negative terminal
(ground)
On-board battery
E