Table of Contents
Advertisement
5.7 NTSC COLOUR OUTPUT
TOP PREVIOUS NEXT
1.
2.
3.
4.
5.
Before Colour Purity, Convergence and White Balance adjustments are attempted, V. Center, V. Height, H. Width, H. Center and Focus adjustments must be
completed.
TOP PREVIOUS NEXT
Item/Preparation
Apply 3.58MHz NTSC Rainbow pattern.
Connect an oscilloscope to TPA36 or TPL1 (R OUT).
CHK2 and press digit key "5" (AKBOFF).
Connect a short jumper to FBT pin 3 or TPA34 and TPA5.
Set control :
Picture menu.......................DYNAMIC CONTROL
Channel Colour Set...........STD
http://servis-manual.com/
Adjustment Procedure
1.
Adjust Bright Control.
a = 2.3 ± 0.2Vp-p
2.
Connect the waveform.
b = 1.3 ± 0.5Vp-p
Advertisement
Table of Contents
