Cast Wheels - Yamaha XC125RR Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Front tire:
Size:
120 / 70 - 13 M/C 53P
Manufacturer/model:
1
KENDA / K703F
Rear tire:
2
Size:
130 / 70 - 13 M/C 57P
Manufacturer/model:
3
KENDA / K703
4
WARNING

Have a Yamaha dealer replace
5
excessively worn tires. Besides
being illegal, operating the vehi-
cle with excessively worn tires
6
decreases riding stability and
can lead to loss of control.
7

The replacement of all wheel
and brake-related parts, includ-
8
ing the tires, should be left to a
Yamaha dealer, who has the
necessary professional knowl-
9
edge and experience to do so.

Ride at moderate speeds after
changing a tire since the tire
surface must first be "broken
in" for it to develop its optimal
characteristics.

Cast wheels

To maximize the performance, durabil-
ity, and safe operation of your vehicle,
note the following points regarding the
specified wheels.

The wheel rims should be checked
for cracks, bends, warpage or oth-
er damage before each ride. If any
damage is found, have a Yamaha
EWA10472
dealer replace the wheel. Do not
attempt even the smallest repair to
the wheel. A deformed or cracked
wheel must be replaced.

The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse han-
dling characteristics, and a short-
ened tire life.

After repairing or replacing the rear
tire, tighten the valve stem nut to
the specified torque.
EAUT4100
1. Valve stem nut
6-19
1
Tightening torque:
Valve stem nut:
2.0 Nm (0.2 m·kgf, 1.4 ft·lbf)