Installing Carousel Players - Tightrope Media Systems Carousel Quick Start Manual

F 3.2: Select the time
IGURE
zone that the server is in from
the pop-down list and choose
OK.

3.2.3 Installing Carousel Players

3.2 System Setup
Follow the instructions in section
video output.
Note that you will need to point this server at the main Carousel Server. To
do this, start the display engine, click on the Configure. . . button and enter
the IP address into the Server field located in the Carousel Server Settings
are of the Configuration screen.
In order to verify connectivity to the Carousel Server, click the check-mark
to the right of the Server field. This action will verify that Player and the
Server can communicate with each other. If you see the status of "OK", choose
the channel you want displayed from the Channel drop down menu and
choose Save. If "FAILED" appears, the player cannot communicate with
the server, verify network connectivity, network settings, and the server's IP
address.
See the Installation Guide for information regarding network port require-
ments for display engines, especially if you are operating a player that is
separated from a Carousel server by a network router.
3.1.2 on page 19 for configuring the player's
23