Initial Setup And Operation; Overview; Cleaner Components; Initial Setup - Pentair PROWLER 910 Installation And User Manual

Overview

Prowler 910 Robotic Pool Cleaners are designed to scrub, vacuum, and filter your aboveground pool. The Prowler
®
cleaner's top loading basket filtration design allows for quick removal of the filter basket and easier cleaning of the
basket. Before operating this product, be sure to read and follow all warning and safety instructions on pages ii-iii.

Cleaner Components:

• Cleaner with 40 ft. Floating Cable
• Power Supply

Initial Setup

Before using the cleaner for the first time, perform the following procedures:
STEP 1:
Power Supply Placement
Position the power supply at least 10 feet (3 m) from the
edge of the pool. See Figure 1.
STEP 2:
Unroll Floating Cleaner Cable
Unroll the floating cable and stretch it out completely so
that it has no kinks. See Figure 2.
Figure 2
KREEPY KRAULY

INITIAL SETUP AND OPERATION

Cleaner with 40 Ft.
Floating Cable
STEP 3:
Connect Power Supply to Cleaner
Connect the floating cleaner cable to the power supply.
Ensure the connector notch is lined up with the
corresponding groove in the socket on the power supply.
Figure 1
Turn the cable connector clockwise to lock the cable into
the power supply connection. See Figure 3.
PROWLER 910 Robotic Aboveground Pool Cleaner Installation and User's Guide
® ®
1
Power Supply
Figure 3