Peavey Triple 40/EFX Owner's Manual page 9

FOOTSWITCH
®
Triple XXX 40
®
Triple XXX 40 EFX
37 38
(35) Channel Select Button
Depressing this button allows you to switch between the Ultra and Rhythm channels. The corresponding LED will
illuminate to indicate which channel is active.
(36) Volume Boost Button
Depressing this switch allows you to toggle your volume boost on or off. Set your volume boost (17 or 25
depending on which version of the amp you own) and then kick this button everytime the drummer gets too loud!
(37–44)
Mode Select
The PFC 3 footswitch operates in two modes: EFX Select mode and Preset Select mode. Pressing the MODE
SWITCH (37) selects between the two modes. The active mode is indicated by the MODE LED (38). Illumination of
the LED indicates EFX Select Mode; a dark LED indicates Preset Select Mode. Controls and indicators 39–44
perform different functions relative to the active mode.
Preset Select Mode
In this mode, all three switches control effects presets. Their corresponding LEDs indicate which preset is active.
Once desired settings are achieved utilizing the effects controls on the front panel, double-click one of the Preset
switches (39, 42 or 44) to store the settings. To return to the last saved settings for a Preset, press the desired
Preset switch once.
For a detailed explanation on creating and storing presets, refer to the TWEAK FEATURES section of this manual.
35
CHANNEL
39 40 41 42
9
36
BOOST
43 44