Renault Clio 2004 Owner's Manual page 52

INSTRUMENT PANEL
The presence and operation of the warning and indicator lights described below depend on the vehicle
equipment and country.
7 Multifunction display
• Oil level display function
The vehicle must be parked
on level ground and the
engine should have been
switched off for some time to
obtain an accurate level
reading.
When ignition has been
switched
approximately 30 seconds:
- if the level is satisfactory,
the display shows "oil ok".
To ascertain the level more
accurately, press the trip
mileage reset button. The
squares which appear on
the display indicate the
level. The number of dots
displayed is reduced as the
oil level drops and they are
replaced by a dash.
- when the level is at its
minimum, the word "ok" is
no longer displayed, the
dashes and the word "oil"
flash and the SERV warning
light comes on.
It is vital to top up the oil as
soon as possible.
(continued)
• Total mileage recorder, trip
on for 8 Multifunction key
• Display selection
• Trip mileage reset button
• Clock reset button
9
It lights up in conjunction with
one of the warning lights:
mileage and clock.
Can be read
approximately 30 seconds
after the ignition has been
switched on.
By pressing the button you
can shift from the total
mileage recorder,
mileage and time or vice-
versa.
Once the display of the trip
mileage is selected, press and
hold the button.
Refer to the information on
the clock in Section 1.
STOP warning light
It goes out as soon as
the engine starts.
9 Engine
system warning light
for This
several functions. Refer to
Section 1 for information on
the engine immobiliser system.
SERVICE warning light
This lights up when the
ignition is switched on
and goes out after 3 seconds. If
it lights up when the vehicle is
trip
being driven, it is advisable to
see a RENAULT Dealer soon.
It lights up together with one of
the warning lights:
Indicator
left-hand
indicators
immobiliser
light performs
light for
direction
1.45