Adjusting Tilt / Prone; Push Handle Adjustment - JCM Jupiter 2 Instruction Manual

Adjustment Tilt / Prone
The chair has been designed to offer a substantial variation of positioning and support, which
the Tilt / Prone angle and back recline mechanism can help to demonstrate. The chair can be
positioned at any point within this range to suit any situation.
Tilt / Prone Angle
•
Pulling and holding lever (A) inwards whilst controlling the chair by the Push handle enables
you to alter the seats tilt / prone angle.
•
Pulling and holding lever (B) inwards whilst controlling the chair by the Push handle
enables you to alter the seats back recline angle.
•
Once a suitable position has been achieved, the lever should be released to lock the chair
in position.

Push Handle Adjustment

A
•
Push Buttons and hold in. The angle of the
push handle can then be altered which has the
secondary function of adjusting the handle height.
When the required position has been achieved
release buttons ensuring the mechanism "clicks"
into place.
•
This may also be used for folding the handle away.
B
13