Advertisement
1.10
SPECIFICATIONS.
Parameter
Carrier Frequency, MHz.
Carrier Frequency, MHz. (optional)
Range (line-of-sight with RFLS-96RC
-496RC receivers)
Delay from start of button depression
to receiver output (fewer than 4
transmitters transmitting
simultaneously)
Delay from start of button depression
to receiver output (more than 3
transmitters transmitting
simultaneously)
Button depression time per cue (fewer
than 4 transmitters transmitting
simultaneously)
Button depression time per cue (more
than 3 transmitters transmitting
simultaneously)
Delay from acoustic event detection to
receiver output (fewer than 4
transmitters transmitting
simultaneously)
Delay from acoustic event detection to
receiver output (more than 3
transmitters transmitting
simultaneously)
Acoustic event transmission duration
Processing rate, acoustic events / sec
Battery current, average, (enabled)
Battery current, average, (xmting)
Battery life (enabled, not transmitting)
Low Battery Detect Threshold
Transmitter Supply Voltage
2.0
OPERATION AND MAINTENANCE.
This
section describes the recommended operating procedure and maintenance for the
transmitter-receiver system.
2.1
OPERATION.
2.1.1 With the receiver turned off and its arm switch set to "disarm" (RFLS-
496HSRC) or "safe" (RFLS-96HSRC & RFLS-912HSRC), connect
devices to the receiver outputs.
Minimum
417.96
432.90
100 msec
400 msec
7.0 V
11 of 14
Typical
Maximum
418.02
418.08
433.96
434.02
½ mile
50 msec
75 msec
100 msec
400 msec
100 msec
425 msec
250 msec
3
1.0 mA
4.0 mA
500 hrs
7.7 V
Advertisement
