Input/Output Delay Panels - Crown 2/300 Operation Manual

Using HiQnet Audio Architect

Input/Output Delay Panels

The CDi DriveCore Series amplifiers offer an Input (pre-Crossover) and Output (post-
Crossover) Delay for each channel. The Output delay is typically used for driver alignment
and provides up to 100ms of delay time per channel. The Input Delay provides up to 1 second
of additional delay time and can be used for delaying the system to the stage backline, delay
Figure 52:
Input and Output Delay buttons
fills, or whenever more delay time is required than the Output Delay has to offer. Delay can be
adjusted in seconds, feet, or meters (see ).
Figure 53
The Input Delay panel can be accessed by clicking the Input Delay button, and the Output Delay panel can be accessed by clicking the Output Delay
button from the Main CDi DriveCore Control panel (see ).
Figure 52
Figure 53:
Input Delay panel
CDi DriveCore Series Operation Manual
Page 40