Delete User Codes; Delete All Settings - Competition SAC5B-CK Operation And Installation Manual

Delete user codes

1. Enter programming mode.
2. Enter one of the codes groups from 01 to 40.
3. Press the button # to delete the codes of which position you just
input, eg. input 01, means delete the codes on the position 01.
4. It is successfully deleted when a three "Di Di" sounds heard as
reminder.
5. Press the button to quit.
Delete a codes directly
1. Enter programming mode.
2. Press the button # to hear a two "Di Di" sounds as reminder.
3. Input 4 digits codes that want to deleted.
4. It is successfully deleted after three sounds heard.
5. Press the button to quit.

Delete all settings

1. Enter programming mode.
2. Press the button # hear a two "Di Di" sounds as reminder.
3. One more press the button # two sounds as reminder.
4. Continuously press the button # 7 times to delete all settings.
Unlocking time turns to one second. The admin codes as same
as before. After five sounds, all settings back to default.
5. Press the button to quit.
-9-
.
.
Handset monitor:
.
MT210B-CK2U MT210C-7CK2U
.
MT210B-CK2 MT210C-7CK2
Hand-free monitor:
MT320C-CK2 MT333C-CK2
MT37XC-CK2U MT37XC-CK2
MT350C-CK2 MT360C-CK2
MT361C-CK2 MT361T-CK2
MT8T-CK2
Icon Description
NO.
Microphone
Monitor
Door lock releasing
.
.
Talking
.
TFT display/CRT
Speaker
.
.
1. When connect more than one indoor monitor please short
circuit J2 of the far the most monitor and open J2 of the other
monitors.
2. When connect more than one indoor monitor please short
circuit J1 and J3 of the closest monitor and open J1 and J3 of
other monitors.
MT200B/C-CK2
MT18B/C-CK2
MT181B/C-CK2
MT360T-CK2
MT300C-CK2
Icon Description
NO.
Talking volume
Brightness
Chroma/contrast
System terminal
Calling
Receiver
Indicated light
.
.
-10-