Table of Contents
Advertisement
6. Further information
6.1. Technical data
• External memory: Depends on the SD card, maximum is 32 GB.
• Internal memory for voice records: 1 GB (0.74 GB / 25 hours available for recording).
• Bit rate during recording over built-in microphone: 64 kbps.
• Bit rate during recording over external microphone: 128 kbps.
• Sampling rate during recordings: 44.1 kHz.
• Sample resolution during recording: 16 bit.
• Bit rate for playback: 8 kbps to 320 kbps, or VBR (Virtual Bit Rate).
• USB 2.0 Hi-Speed connection.
• Memory card slot MMC, SD and SDHC, maximum card size 32 GB.
• Headphone jack: Standard 3.5 mm.
• External Microphone jack: 3.5 mm .
• Body made of impact-resistant plastic.
• Measurements: 85 x 54 x 14 mm (3.35" x 2.13" x 0.55").
• Weight: 49 grams (1.7 ounces).
• Built-in rechargeable lithium polymer battery.
• Maximum run time: Over 15 hours (depends strongly on type of usage).
• Maximum charging: 3 hours.
6.2. Protecting your Milestone
Please protect Milestone 212 from mechanical overload, humidity and from contact with
water. All parts of the guarantee are voided by inappropriate use or opening of the device.
6.3. Troubleshooting - nothing works anymore
First of all relax and please do not beat poor Milestone 212. Not before you have tested
the following steps:
Step 1:
Is the device charged? Connect your Milestone 212 to a power outlet and ensure that the
charger is powered. Recharge the built-in battery for at least half an hour. Afterwards press
"Play" at least half a second. If Milestone 212 does not speak go to step 2.
Step 2:
Is the keyboard locked? While keeping the "Mode" button pressed, press the "Rec" button
briefly and listen for the response of the device:
• You hear the message "Keyboard active": Keyboard was locked and is now unlocked.
• You hear the message "Keyboard locked": Keyboard has now just been locked. Press
the same combination of buttons once more to unlock the keyboard. The device will play
the message "Keyboard active".
• If you hear nothing go to step 3.
Step 3:
If you do not hear anything, the device is not functioning properly. Please press and hold
all front buttons except "Play". This restarts the device. If it is still not working you can try to
reinstall the software as described in the following chapter or you contact your dealer.
15
/16
Advertisement
Table of Contents
