Desktop Charger (Option); Low Battery Alarm - Maxcom MM462BB Instruction Manual

2. Connect the plug to the wall socket. In the right
upper corner information about battery charging will
appear. The battery symbol shows the battery
charging state.
3. When the battery is fully charged disconnect the
charger from the wall socket and then the cable
from the phone.
3.3.1

Desktop charger (option)

In the case of using the desktop charger, first connect the
small plug of the charger to the desktop charger and then
connect the adapter to the wall socket. To charge the
battery insert the phone to the desktop charger with the
contacts directed downwards.
3.4

Low battery alarm

The phone will generate a sound signal (if warning sounds
are activated in profiles) together with the message on the
display when the battery level will be too low. The display
will show the red symbol of empty battery
battery when this message will appear.
20
Charge the
.