LeeLen JB-304 User Manual page 17

C) Change entry password 2
Step 1> Get into the program status as 4.5.1.
Step 2> Push *02*. If it sounds a long beep, then
Step 3> Push the new password and end by # button. If it sounds a long beep, then
Step 4> Repeat the new password and end by # button. If it sounds a long beep, the new password
is valid.
For example, if the default password needs to be changed to 6666, then do as the following figures
1234
C A L L
MI C
①
Before the door station exits the program status, t
②
operation fails. The three group passwords should be exclusive to each other.
In case both are same, entry password 2 would be invalid, even if the change is successful.
set one by one at one time by starting from step 2, while the door station is on the program status.
4.5.3 Exit the program status
Method 1> Double push # button.
Method 2> Push the program button.
Method 3> Don't operate in 15 seconds.
4.5.4 Recall password
In case residents forget the passwords, please push the program button and then do the same as 4.5.2.
*02*
C A L L
MI C
he change can be tried again by
15
6666#
C A L L
MI C
repeating step 3 & 4 once the previous
③
Entry password 1 is prior to Entry password 2.
④
The three group passwords can be
6666#
C A L L
MI C