Password (For Model No.18 Only) - LeeLen JB-304 User Manual

4.5 Password settings (for Model No.18 only)
Residents are allowed to use passwords to release the doors on the door station Model No.18. There
are three group passwords. They are
> System password (default:1234). It is the key to change all passwords.
> Entry password 1 (default:1235)
door stations.
> Entry password 2 (default:1236). It is the key to open the gates that connect to the terminals of the
indoor phones (extra unlock buttons on Model N60, N72B and N75B).
4.5.1 Get into the program status
Method 1>> Use the system password on the door station.
For example, push 1234 as the following figure.
Method 2>> Push the program button on the back side of the door station as the following figure.
The door station will sound a long beep to indicate the successful operation. Otherwise it will sound double beeps instead. It is same
to 4.5.2.
1234
C A L L
MI C
4.5.2 Change passwords
A) Change the system password
Step 1> Get into the program status as 4.5.1.
Step 2> Push *00*. If it sounds a long beep, then
Step 3> Push the new password and end by # button. If it sounds a long beep, then
Step 4> Repeat the new password and end by # button. If it sounds a long beep, the new password
is valid.
For example, if the default password needs to be changed to 4444, then do as the following figures.
1234
C A L L
MI C
B) Change entry password 1
Step 1> Get into the program status as 4.5.1.
Step 2> Push *01*. If it sounds a long beep, then
Step 3> Push the new password and end by # button. If it sounds a long beep, then
Step 4> Repeat the new password and end by # button. If it sounds a long beep, the new password
is valid.
For example, if the default password needs to be changed to 5555, then do as the following figures
1234
C A L L
MI C
. It is the key to open the doors that connect to the terminals of the
OR
L+ L-
JPT
PT
NC
S2
S1
*00*
C A L L
MI C
*01*
C A L L
MI C
4444#
C A L L
MI C
5555#
C A L L
MI C
14
4444#
C A L L
MI C
5555#
C A L L
MI C