Nokia RM-57 Service Manual page 118

Nokia Customer Care
32. Remove the Antenna Assy.
33. Push out the Slide Sensor with a dental tool.
34. Remove the Slide Sensor.
Note: Note the right position when reassembling.
Removing shielding lids
Steps
1. Place the Engine Module on the soldering jig.
Note: Always use the soldering jig as a support when working on the Engine Module.
Page 5–14 Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Disassembly/Reassembly Instructions
RM-57/58
Issue 1