Page 1
Puffin Kayak Assembly User Information ScanSport, Inc. / Pakboats Post Office Box 700 May Street Enfield, New Hampshire 03748 USA Phone: (888) 863-9500 (toll free) From outside the US: +1 (603) 632-9500 Fax: (603) 632-5611 Email: info@pakboats.com www.pakboats.com...
Page 2
(B1) (B2) Cross Ribs Boat Skin Stem Stem Latch Clip Keel Gunwales Forward Deck Support w/latch clip Stern Deck Support w/clip at end Seat Deck Figure 1, Parts (B1) (B2) Cross Ribs: Gunwale in channel) Stem (inside boat skin) Gunwale in channel) Stern Deck Support Keel...
Page 3
NOTE! We recommend that you study this manual carefully before you start the assembly procedure! When assembling the Puffin Kayak, please refer to Figure 1 and Figure 2 of this manual. Roll out the boat skin and assemble all the...
Page 4
Support the boat with your foot while stretching the deck to fit over the bow. 16. Attach the Velcro fastener along the edge of strip on the the deck to the matching Velcro boat skin. The Puffin Kayak is now complete. – 4 –...
Page 5
Under these conditions you should add some extra pressure during assembly. Disassembling the Puffin Kayak Disassembling is essentially the assembly process in reverse, but there are a few important details: Undo all the Velcro before you try to get the ends of the deck off.
Page 6
Some general information about your Puffin Kayak Patches and Reinforcements Punctures and abrasions to the kayak skin are Punctures of the air tubes can be repaired with easily repaired with the enclosed repair kit. the adhesive in the repair kit and a patch. The patch material in the repair kit can be used on •...
Page 7
ScanSport, Inc. / Pakboats Post Office Box 700 May Street Enfield, New Hampshire 03748 USA Phone: (888) 863-9500 (toll free) From outside the US: +1 (603) 632-9500 Fax: (603) 632-5611 Email: info@pakboats.com www.pakboats.com...