Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Pakboats Manuals
  4. Boat
  5. Puffin Swift
  6. User information

Pakboats Puffin Swift User Information

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Puffin Swift
Assembly
and
User Information
ScanSport, Inc. / Pakboats
234 May St
Post Office Box 700
Enfield, New Hampshire 03748 USA
Phone: (888) 863-9500 (toll free)
From outside the US: +1 (603) 632-9500
Fax: (603) 632-5611
Email: info@pakboats.com
www.pakboats.com

Advertisement

loading

Related Manuals for Pakboats Puffin Swift

Summary of Contents for Pakboats Puffin Swift

  • Page 1 Puffin Swift Assembly User Information ScanSport, Inc. / Pakboats 234 May St Post Office Box 700 Enfield, New Hampshire 03748 USA Phone: (888) 863-9500 (toll free) From outside the US: +1 (603) 632-9500 Fax: (603) 632-5611 Email: info@pakboats.com www.pakboats.com...
  • Page 2 (B1) (B2) Cross Ribs A-stop Air Valve Boat Skin Support Rods Stem Stem Keel Latch Clip Gunwales Forward Deck Support w/latch clip Stern Deck Support w/clip at end Seat Deck Figure 1, Parts Support Rods: (B1) (B2) Cross Ribs: Gunwale in channel) Stem (inside boat skin)
  • Page 3 NOTE! We recommend that you study this manual carefully before you start the assembly procedure! When assembling the Puffin Swift, please refer to Figure 1 and Figure 2 of this manual. Roll out the boat skin and assemble all the...
  • Page 4 Inflate upper air tubes just enough to give a Make sure the keel is straight during the little pressure. Inflate lower air tubes iinflation. If it bowes to one side, add more pressure to the air tubes on that side. The alternately until they feel hard (about as much hull is straight when the keel is between the as you can easily do with the pump provided).
  • Page 5 Support the boat with your foot while stretching the deck to fit over the bow. The Puffin Swift is now complete. – 5 –...
  • Page 6 • Reduced pressure in the air tubes is common if you assemble the boat on a warm, sunny day and go paddling in cold water. Under these conditions you should add some extra pressure during assembly. Disassembling the Puffin Swift Disassembling is essentially the assembly process in reverse, but there are a few important details: Undo all the hook and loop fasteners before you try to get the ends of the deck off.

  • Page 7: General Information

    Storage Your Puffin Swift is equally happy stored assembled or packed in the bag. Salt Water Following exposure to salt water, rinse the Puffin Swift in fresh water if you can. This will help preserve the Puffin Swift’s appearance. Repairs HULL - If you need to repair a puncture or abrasion of the hull, use a patch of the same material and the repair kit adhesive.
  • Page 8 ScanSport, Inc. / Pakboats 234 May St Post Office Box 700 Enfield, New Hampshire 03748 USA Phone: (888) 863-9500 (toll free) From outside the US: +1 (603) 632-9500 Fax: (603) 632-5611 Email: info@pakboats.com www.pakboats.com...