Idec Micro 3 Series - Quartech 2800 Manual

2800 & 2900 Series PLC Drivers

Idec Micro 3 Series

The Micro 3 Series PLC interface varies based on the model. Also both point to point communications and network
communications are available.
ScreenMaker 2000 Port setup:
Communication format: 7 data bits, 1 stop bit, even parity, 9600 bps.
The following schematics show cable connections required between the OIT and the various Micro 3 ports. Both
cables are available from Quartech in a standard length of ten feet. 2154 cables up to two hundred feet in length may
be ordered. 2155 cables up to fifty feet in length may be ordered.
8 Pin Mini DIN
RXD
TXD
SC
SC
8 Pin Mini DIN
RxTxA
TxTxB
SC
PLC Type: Micro 3 RS-485, Micro 3C RS-232, Data Link RS-485
Host PLC node address: 0 through 1F hexadecimal
Command Word Address: Internal Relay (M Type), one word
Screen Trigger Address: Data Register (D Type), two contiguous words
Idec Micro 3C
Quartech Part Number: 2154-10
Micro 3C
)))))))))))))))))))))))
4 <
)))))))))))))))))))))))
3 <
))))))))))))0))))))))))
6 <
))))))))))))-
7 <
Idec Micro 3
Quartech Part Number: 2155-10
Micro 3
)))))))))))))))))))))))
2 <
)))))))))))))))))))))))
1 <
)))))))))))))))))))))))
7 <
2800/2900
15 Pin Female D-Type
< 2
< 3
< 7
+)))))
< 4
.)))))
< 5
))))
Drain Wire < 1
2800/2900
15 Pin Female D-Type
< 13
< 12
< 7
+)))))
< 4
.)))))
< 5
))))
Drain Wire < 1
TXD
RXD
SC
RTS
CTS
FG
RxTxA
RxTxB
SC
RTS
CTS
FG
DM2829_PLC Revision 2
Page 10