Table of Contents
Advertisement
Quick Links
PLC Driver Manual
Compact Operator Interface Terminals
DM2829_PLC Revision 2
Other documents relative to the 2800 & 2900 are:
The product described in this document can have a variety of uses, the user and those responsible for applying this
equipment must satisfy themselves as to the acceptability of each application and the use of the unit. Under no
circumstances will QUARTECH CORPORATION be responsible or liable for any damage, including indirect or
consequential losses resulting from the use, misuse, or application of the unit.
The text, illustrations, charts, and examples included in this document are intended solely to help explain applications
of the product. Due to the many variables associated with specific uses or applications, QUARTECH CORPORATION
cannot assume responsibility or liability for actual use based upon the data provided in this document.
No patent liability is assumed by QUARTECH CORPORATION with respect to the use of circuits, information,
equipment, or software described in this document.
This document is subject to change without notice.
2800 & 2900
with PLC communication drivers
Quartech Corporation
15943 Angelo Drive
Macomb Township, Michigan 48042-4050
Phone: (810) 781-0373 FAX: (810) 781-0378
www.quartechcorp.com
2800 Hardware Manual, HM2800
2900 Hardware Manual, HM2900
2800/2900 ASCII Driver Manual, DM2829_ASCII
2800 Product Manual, AB Ultra 100, PM2800ABU
Advertisement
Table of Contents
Related Manuals for Quartech 2800
Summary of Contents for Quartech 2800
- Page 1 The text, illustrations, charts, and examples included in this document are intended solely to help explain applications of the product. Due to the many variables associated with specific uses or applications, QUARTECH CORPORATION cannot assume responsibility or liability for actual use based upon the data provided in this document.
-
Page 2: Table Of Contents
Page 2 2800 & 2900 Series The 2800 and 2900 Operator Interface Terminals (OIT) share a common software package, a common panel cutout and have a near identical list of communication drivers. This manual provides important information necessary for connecting either unit to a particular brand or model of Programmable Controller. -
Page 3: Allen-Bradley Plc-5 Df1
The following schematic shows the cable connections required between the OIT and the PLC-5 DF1 port. This cable is available from Quartech in a standard length of ten feet. Cables up to fifty feet in length may be ordered. Allen-Bradley PLC-5 DF1... -
Page 4: Allen-Bradley Slc500, Df1
The following schematic shows the cable connections required between the OIT and the SLC500 DF1 port. This cable is available from Quartech in a standard length of ten feet. Cables up to fifty feet in length may be ordered. Allen-Bradley SLC500 DF1... -
Page 5: Allen-Bradley Slc500, Dh485
The schematic on the next page shows the cable connections required between the OIT and the SLC500 DH485 port. This cable is available from Quartech in a standard length of ten feet. Cables up to one hundred feet in length may be ordered. - Page 6 Page 6 2800 & 2900 Series PLC Drivers Allen-Bradley SLC500 DH485 Quartech Part Number: 2145-10 SLC500 2800/2900 8 Pin RJ45 15 Pin Female D-Type ))))))))))))))))))))))) ))))))))))))))))))))))) RxTxB 1 < < 12 RxTxB ))))))))))))))))))))))) ))))))))))))))))))))))) RxTxA 2 < < 13 RxTxA...
-
Page 7: Allen-Bradley Plc-2
The following schematic shows the cable connections required between the OIT and the PLC-2 port. This cable is available from Quartech in a standard length of ten feet. Cables up to fifty feet in length may be ordered. Allen-Bradley PLC-2... -
Page 8: Fuji Electric N Series
The following schematic shows the cable connections required between the OIT and the N Series PLC port. This cable is available from Quartech in a standard length of ten feet. Cables up to two hundred feet in length may be ordered. -
Page 9: Ge Fanuc Series Ninety
The following schematic shows the cable connections required between the OIT and the SNP port. This cable is available from Quartech in a standard length of ten feet. Cables up to two hundred feet in length may be ordered. GE Fanuc Series 90... -
Page 10: Idec Micro 3 Series
The following schematics show cable connections required between the OIT and the various Micro 3 ports. Both cables are available from Quartech in a standard length of ten feet. 2154 cables up to two hundred feet in length may be ordered. 2155 cables up to fifty feet in length may be ordered. - Page 11 Command Word and Screen Triggers are located in it. The OIT will be capable of reading and writing data to the other PLCs on the network. The OIT is connected to the network through the Quartech 9108 Network Link Adapter. Model 9108...
-
Page 12: Mitsubishi Fx Series
Page 12 2800 & 2900 Series PLC Drivers The FX Series interface uses signal levels is intended point to point communications, i.e., only a single peripheral device may be connected to the FX port. Command Word Address: Internal Coil (M Type), one word Screen Trigger Address: Data Register (D Type), two contiguous words 7 data bits, 1 stop bit, even parity, 9600bps. -
Page 13: Modicon Modbus
The following schematic shows the cable connections required between the OIT and various MODBUS ports. These cables are available from Quartech in a standard length of ten feet. Cables up to fifty feet in length may be ordered. Modicon Modbus 984... -
Page 14: Omron Host Link
OIT and LK201 Host port. This cable is available from Quartech in a standard length of ten feet. Cables up to fifty feet in length may be ordered. Omron Host Link Quartech Part Number: 2132-10 2800/2900 25 Pin Male D-Type ))))))))))))))))))))))) <... -
Page 15: Toshiba Ex100 Protocol
The following schematic shows the cable connections required between the OIT and the Toshiba programming port. This cable is available from Quartech in a standard length of ten feet. Cables up to twenty five feet in length may be ordered. -
Page 16: Toshiba T-Series Computer Link
Page 16 2800 & 2900 Series PLC Drivers T1 interface RS-232 or signal levels on the configuration. single master slave network be configured using the RS-485 One PLC as the meaning the Word and Triggers are in it. The OIT will be capable... -
Page 17: Yaskawa, Mp930 Memobus
The following schematic shows the cable connections required between the OIT and the MP930 port 2 . This cable is available from Quartech in a standard length of ten feet. Cables up to fifty feet in length may be ordered.