Control Panel Description - Chauvet COLORado 1 Quad Zoom VW Quick Reference Manual

Control Panel Description

Button
<MENU>
<ENTER>
<UP>
<DOWN>
Passcode
After being prompted, enter the following passcode by pressing:
<UP>, <DOWN>, <UP>, <DOWN>, <ENTER>
This passcode cannot be changed and must be used whenever prompted.
Menu Map
Main Level
STAT
RUN
DMX
PERS
SET
COLORado 1 Quad Zoom VW QRG Rev. 1
QUICK REFERENCE GUIDE
Exits from the current menu or function
Enables the currently displayed menu or sets the currently selected value into the
selected function
Navigates upwards through the menu list or increases the numeric value when in a
function
Navigates downwards through the menu list or decreases the numeric value when in
a function
Programming Levels
W.
C.
Z.
DMX
SLAV
D. 001 - D.512
STD.P
STD.Y
STD.W
UNO
CALE
DIM
DERR
ZOOM
CURV
REST PASS
Function
000-255
YES
NO
OFF
DIM.1
DIM.2
DIM.3
DIM.4
BLAC
SAVE
BASE
POS.1
POS.2
OFF
CV1
CV2
CV3
****
( )
ENTER PASSCODE
Description
Combines warm white (W.) and cool
white (C.) to make a custom color
(0–100%)
Changes the beam angle (zoom)
DMX mode
Master/ Slave mode
Selects the DMX starting address
10-channel: dimmer, fine dimmer,
warm white, fine warm white, cool
white, fine cool white, macros,
strobe, zoom, zoom reset
10-channel: dimmer, fine dimmer,
warm white, fine warm white, cool
white, fine cool white, macros,
strobe, zoom, zoom reset
6-channel: dimmer, fine dimmer,
macros, strobe, zoom, zoom reset
1-channel: dimmer
Allows editing of the CAL1 > WH.01
-WH.05 programming levels
Locks out editing of the CAL1 >
WH.01 -WH.05 programming levels
Turns the dimmer off
Selects dimming profiles from
fast (DIM.1) to slowest (DIM.4)
Blacks out fixture upon loss of DMX
Continues with last command upon
loss of DMX control
Sets default zoom position
(full movement)
Sets position 1 setting for zoom limit
Sets position 2 setting for zoom limit
Turns dimming curve off
Selects dimming curves from
fast (CV1) to slowest (CV3)
Defaults the product to factory
settings
EN
3