Siemens 3964R User Manual page 15

11
Enabling this option will cause the server to start as a Windows NT service.
Windows NT offers the capability of running applications even when a user is not
logged on to the system. This is valuable when systems must operate in an unattended
mode. Enabling this option and rebooting the system will cause the server to run as a
Windows NT service. However, to view configuration information or to reconfigure
the server, the user must log on to the system. Any server related problems that may
arise such as missing adapter cards, licensing failures or device drivers not loading will
not be visible to the user until a log on is performed. Disabling this option and
rebooting the system will cause the server to run as a Windows NT application program
once again.
Note It is highly recommended that the server is configured and communicating
successfully prior to running it as a Windows NT service.
Click Cancel to close the dialog box without saving changes.
Click OK to accept the server settings. The following message box will appear:
Click OK to close the dialog box.
Note You must restart the server for the changes to take effect.