Page 1
Single Spindle Drinks Mixer Instruction manual MODEL CD561-A...
Page 2
Keep all packaging away from children. Dispose of the packaging in accordance with the regulations of local authorities If the power cord is damaged, it must be replaced by a APURO agent or a recommended qualified technician in order to avoid a hazard ...
Page 3
Installation Position mixer on level and stable surface Layout of Controls 0 = Off I = Low Speed II = High Speed Operation 1. Place the drink ingredients into the mixing jug, ensuring that the maximum fill line is not exceeded. 2.
Replacing the agitator 1. Turn off the mixer and disconnect from the power supply. 2. To remove agitator unscrew counter clockwise. 3. To replace agitator screw clockwise. Cleaning, Care & Maintenance Always turn off the mixer and disconnect from the power supply before cleaning Use warm soapy water to clean the bowl, and agitator.
Page 5
Compliance APURO parts have undergone strict product testing in order to comply with regulatory standards and specifications set by international, independent and federal authorities APURO products have been approved to carry the following symbol:...
DECLARATION OF CONFORMITY Equipment Type Drinks mixer Model CD561-A Legislation C-Tick SAA-150987-EA AS/NZ 3820 Essential Safety Requirements for Low Voltage Electrical Equipment Standards AS/NZS CISPR 14.1 IEC 60335-1:2010 AS/NZ 60335-2-64:2002+A1:2008 Producer Name Apuro Producer Address 15 Badgally Road, Campbelltown, NSW 2560 I, the undersigned, hereby declare that the equipment specified above conforms to the above Legislation and Standard(s).
Need help?
Do you have a question about the CD561-A and is the answer not in the manual?
Questions and answers