altura PRO SERIES User Manual page 8

2. Turning ON/OFF & Testing the Altura
Photo Flash Unit
2.1. Turning on the Flash Unit
Press and hold the <ON/OFF>
button for 2 seconds. The LCD
display will turn on along with
the red LED indicator light.
2.2. Testing the Altura Photo
Flash Unit
Once the Altura Photo flash unit
is on, press the <PILOT> button
to verify that it fires okay. Use
this button to test different
settings as well.
2.3. Turning off the Altura
Photo Flash Unit
Press and hold the <ON/OFF>
button for 2 seconds again. The
LCD display and red LED
indicator light should turn off.