Table of Contents
Advertisement
10. Restore Factory Settings
Press and hold the <SET> and <ON/OFF>
button at the same time while the Altura Photo
Flash is off. This will reset the flash back to
factory settings and display manufacturer data.
Release the buttons to resume normal control of
your flash.
The Advanced Application
1. Off-Camera Lighting Application
To utilize a multi-flash setup, first use your
camera's built-in flash, or a hot shoe mounted
Altura Photo flash, as a master flash. You can
then use any other amount of external flashes in
slave mode to produce a dynamically lit scene.
Keep the wireless trigger sensor of the slave
flashes facing the master flash at all times and
try to avoid exposing the trigger to direct sunlight.
Advertisement
Table of Contents
