VQ RETRO MINI Operation Manual page 24

GB
Retro Mini Operation Guide
2. Enable Bluetooth on your device.
3. On your device, select an option to add a new Bluetooth device.
NOTE: Adding a Bluetooth Device varies on different smart devices, if in doubt please refer to your device
manufacturers manual.
4. Start the pairing on your device. Do this by selecting "Retro Mini" from the list of available devices shown
on your device. This will connect automatically and once paired, your Retro Mini display will show
"Connected".
NOTE: The auto pairing will search for 1 minute for available device. If nothing is paired, the display will
show "NO CONNECTION".
5. To reconnect or disconnect from Retro Mini, press and hold the MODE button until a "Beep" sound is heard.
NOTE: You will need to disconnect any connected Bluetooth devices from Retro Mini to stream from a
different Bluetooth device.
NOTE: Bluetooth will automatically disconnect if you are out of the range of the Retro Mini.
Controlling Bluetooth music playback
You can control the music in Retro Mini to your Bluetooth device wirelessly.
1. Press Play/Pause button to play or pause the music playback.
2. Press Left and Right button to skip track or press and hold to rewind and forward.
3. Press the Vol+ and Vol - button to adjust the volume level.
NOTE: You can do vice versa, press the same type of buttons in your Bluetooth device to control the music
playback function wirelessly.
24