Troubleshooting - Brookstone flightforce User Manual

TROUBLESHOOTING

Problem
1 After connecting the
drone to the battery,
the LED indicators
keep flashing, but there
is no response when
operating
2 No response after
battery is connected to
drone
3 Motor does not
respond to throttle
stick, receiver LED
flashes
4 Main rotor continues to
spin after landing
Cause
Unable to pair to App
1. Check if the power of
remote control or
receiver is connected
2. Check the remote
control and receiver
voltage
3. Poor contact on battery
terminals
Drone battery depleted
Throttle stick is not in the
lowest position
Solution
Pair the App and
drone (refer to P.11)
1. Turn on control and make
sure drone battery is inserted
properly
2. Use fully charged batteries
3. Re-seat the battery and
make sure there is good
contact between batteries
Fully charge the battery, or
replace with a fully charged
battery
Make sure the throttle stick is in
the lowest position
23