L.T. Rich Products Snowrator Zx4 Owner's Manual page 16

The blade control Joystick Valve has 5 positions of operation. Pulling back on the
Joystick Valve will raise the blade to the up position (off the ground for transport of
transition). Pulling the Joystick Valve to the left tilts the blade to the left allowing to
angle the snow to the left. Pulling the Joystick Valve to the right tilts the blade to the
right allowing to angle the snow to the right. Pushing the Joystick Valve forward to the
FIRST forward position from center lowers the blade with down-force pressure for
plowing. Pushing the Joystick Valve forward to the SECOND position gives FLOAT to
the blade.
(Neutral position) (
(First forward position, downforce)
Float/detent, second forward position)
(Blade lift position)
(Top view / angle left position) (Top view / angle right position)
*Always turn fuel "OFF" when transporting or storing Snworator*
Page 13