DEEBOT MINI Instruction Manual page 12

3. Operating and Programming
6 Start
Press the AUTO Mode Button on DEEBOT
or on the Remote Control. DEEBOT starts to
work immediately in AUTO Cleaning Mode.
To choose another Cleaning Mode, please
*
refer to section 3.3 Cleaning Mode Selection
for details.
7 Pause
Pause DEEBOT by pressing the AUTO Mode
B u t to n o n D E E B OT o r t h e S TA R T / PAU S E
Button on the Remote Control.
DEEBOT can be directed to move forward,
*
backward, left and right using the Direction
Control Buttons on the Remote Control
w h e n i t i s Pa u s e d . D E E B OT d o e s n o t
clean when Paused.
To save power, the AUTO Mode Button on the robot's Control Panel stops glowing after
*
the robot is paused for more than 10 minutes. Press the AUTO Mode Button on the robot to
wake up the robot, or press any button on the Remote Control to start the robot immediately.
8 Power OFF
Pause DEEBOT. M ove the B ottom Power
Switch to the OFF position.
When DEEBOT is not cleaning, it is suggested
*
to keep it powered ON and charging.
10
EN