Opalum Floorbased Sound Unit Owner's Manual page 4

The controls (EN)
Status indicator
1.
Indicates the current status:
OFF – the system is in Standby or has no power
•
ON – the system is ON
•
Flashing – the system is in Bluetooth pairing mode
•
Bluetooth pairing button
2.
Use this button to start the Bluetooth pairing process. You only need to pair devices that have not
been paired with the sound system before.
Using the sound system
1 On/Standby
The system has no OFF mode. When not in use, the system will automatically enter Standby mode, which
ensures a power consumption of less than 0.5W. The system is considered in use when a device streaming
audio is connected, or if a pairing process is started by pressing the pairing button.
2 Bluetooth
To connect your Bluetooth enabled device to the sound system you first need to pair the devices. The
sound system will only pair if it is put into pairing mode. Do this by pressing the "Bluetooth pairing" button
on the front for two seconds, until the LED starts flashing and there is an acoustic feedback. Please see the
user guide of your device for how to pair. The pairing process is done when a device is paired, or if the time
exceeds five minutes.
The system will provide the following feedback in pairing mode:
State
Not pairing
Pairing starts
Pairing completed
Pairing times out
In the Bluetooth list on your device, the sound system will be identified by the name "OPALUM FSU
xxxxxx", where xxxxxx is a unique number. After pairing is completed the sound system remembers the
device, and vice versa – so next time you just simply connect, no pairing needed.
4
Status indicator
ON
Flashing
ON
ON
Acoustic feedback
None
Yes
Yes
Yes
Owner's guide
Rev. 1.0