Reset Switch - Panasonic kx-ns0154la Installation Manual

LED Indications
Green (4 channels —
without activation
key )
*1
Blue (8 channels —
with activation key
Amber
Red
Red and green
OFF
*1 Refer to "Optional Accessories".
Note
LED flashing patterns are as follows:
•
Slow Flashing: 60 times per minute
•
Moderate Flashing: 120 times per minute

RESET Switch

Pressing the RESET switch allows you to return the unit to its factory default settings, perform site survey mode
operations or perform advance diagnosis mode operations.
Pressing and holding the RESET switch for 10
seconds when the unit is on.
Pressing and releasing the RESET switch in site
survey mode.
Color
ON
Slow Flashing
Moderate Flashing
ON
)
*1
Slow Flashing
Moderate Flashing
ON
Slow Flashing
Moderate Flashing
ON
Slow Flashing
Moderate Flashing
Alternate blinking
Operation
Stand-by (no active calls)
Talking (active calls, channels available)
All channels busy
Stand-by (no active calls)
Talking (active calls, channels available)
All channels busy
Stand-by (unstable air/LAN synchronization [no active
calls])
Talking (unstable air/LAN synchronization [active calls])
All channels busy (unstable air/LAN synchronization)
Fault
Out of service or starting up (from data link
establishment to air/LAN synchronization)
Starting up (communication with the PBX not
established)
Site survey master mode
Power off or updating the firmware
Description
Returns the unit to its factory default settings.
Makes the unit a slave CS for the site survey.
Pressing the RESET switch again returns the unit to a
Master CS.
For details about performing the site survey, refer to
"3.3 Site Survey".
2 Overview
Status
Installation Guide 13