Operating The Rewind; Starting - Paxar Rewind Monarch 415 Operator's Handbook Manual

3. Operating the Rewind

Starting

1. Turn the speed control knob (Figure 6) to SLOW.
2. Push the rewind power switch (Figure 7) ON.
NOTE: The rewind will start to turn. When the dancer
roller is almost horizontal, the rewind will stop.
3. Start the printer.
4. Adjust the rewind speed to the speed of the printer.
NOTE: If you stop the printer, the rewind will stop. If the
printer runs out of supplies, the rewind will keep
running until you turn it off.
Power
Switch
Speed Control
Knob
Figure 6
Figure 7
7