Description
6
Remove the screws of Main Board and
SMPS Board.
•
Remove the 4 screws of Main Board.
•
Remove the 3 screws of SMPS Board.
NOTE
•
If you need, Side Bracket also.
•
If you want to change the only Panel,
you don`t need to separate Boards
and cables (except LVDS).
7
Lift up the Panel.
NOTE
If you re-assemble, you should keep the
stop-point.
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
3. Disassembly and Reassemble
Picture Description
Screws
6001-002756
(Machine)
3-11