Table of Contents
Advertisement
Wiring Diagram Hook Up Procedure
1) Connect the power harness to the
mating connector on the video pod.
2) Connect the power harness to the
vehicle' s electrical system by tapping
into an accessory hot line.
3) Verify all functions of the system before
mounting of the finished assembly.
Optional Remote
Headphone
Stations
Stereo Headphone
Jack
Spade
Terminals
Spade
Terminals
Stereo Headphone
Spade
Jack
Terminals
FM Modulator (p/n 1070610) and IR
Wireless Headphones (p/n WHS100)
could be connected with two dual patch
cords connected to left and right RCA
output jacks shown at right. Two RCA " Y"
adapters are required for this application
(p/n 0892165).
Green
(Right+)
Black
(Ground)
Gray
(Left+)
Antenna
Power Harness
TV antenna
Item 1
(If applicable)
Red: +12 VDC
(Accessory Cir.)
Antenna
Connector
7
Black: Ground
Power
Connector
(2-pin)
Right Out
(Red)
Left Out
(White)
Advertisement
Table of Contents
