Using The 4:3 Stretch; Adjusting The Sound; Adjusting Sound Settings - Toshiba 32L221U User Manual

32L221U / 55L421U 32" 720p / 55" 1080p 60Hz LED Google Cast™ TV

Using the 4:3 Stretch

When 4:3 Stretch is turned on, your TV displays 4:3
programs as a full-screen picture.
1 Press MENU, press
then press OK.
2 Highlight Display Settings, then press OK.
3 Highlight 4:3 Stretch, then press OK.
4 Highlight On, then press OK. (To turn off 4:3
Stretch, select Off.)
5 Press EXIT to close the menu.

Adjusting the sound

This section covers:

• Adjusting sound settings

• Playing TV audio only
Adjusting sound settings
You can adjust sound settings to improve the sound
quality.
1 Press MENU, press
then press OK.
or to highlight Picture,
or to highlight Sound,
www.tv.toshiba.com
2 Highlight an option, then press OK. You can select:
• Sound Mode—Selects the sound mode. You
can select Standard, Music, Movie, Clear Voice,
or Enhanced Bass.
Note
You can also press Sound to select the
Sound Mode.
• Reset—Resets all sound settings to the factory
default.
• Balance—Adjusts the balance between the left
and right audio channels.
• Bass—Adjusts the low sounds.
• Treble—Adjusts the high sounds.
• Advanced Sound Settings—Opens the
Advanced Sound Settings menu where you can
adjust additional sound options.
• TruSurround—Delivers clear, crisp, and
natural sound over front facing speaker
configurations, complete with rich bass, high
frequency detail, and clear dialog. You can
select On or Off.
• Dialog Clarity—Adjusts the volume of
dialog when watching movies or TV
programs. You can select Off, Low, or High.
• TV Speakers—Turns your TV's speakers on or
off. You can select:
• Auto—Turns off the TV speakers when you
connect a device to the
• On—Keeps the TV speakers on when you
connect a device to the
• Off—Turns off the TV speakers.
• MTS—(Analog channels received through the
ANT / CABLE IN jack only) Selects the audio
mode. You can select:
• Stereo—Select this option for programs
broadcast in stereo. You can typically leave
your TV in Stereo mode because Stereo
outputs the type of sound being broadcast
(stereo or mono).
• Mono—Select this option if there is noise or
static on weak stereo broadcasts.
• SAP—Select this option to listen to a
secondary audio program, if available. If you
select this option and no secondary audio
program is available, you may not hear
sound. Change the MTS option to Stereo.
• Digital Audio Selection—Lets you
conveniently switch between audio tracks on a
digital channel (when available). This option
temporarily overrides the Primary Audio
Language option on the Sound menu.
• Primary Audio Language—Selects the
language for digital channels.
jack.
jack.
67