Table of Contents
Advertisement
The "System" screen appears.
3 Touch [Dimmer Settings].
4 Touch [Day/Night].
The pop-up menu appears.
5 Touch the item you want to set.
Day (default):
Deactivates the dimmer function.
Night:
Activates the dimmer function.
Setting the duration of time
for the dimmer function to be
active
You can set the duration of time for the
dimmer function to be active.
p This function is available only when
"Dimmer Trigger" is set to "Time".
For details, refer to Setting the dimmer
function on page 46.
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [Dimmer Settings].
4 Touch [Dimmer Duration].
The duration setting bar appears.
5 Touch the desired points on the
duration setting bar, or slide the
cursors to specify the start time
and the end time, respectively.
p The time display format depends on the
"Time Format" setting.
p The value displayed at the centre of the
duration setting bar ("12" for 12-hour
format and "00" for 24-hour format)
indicates midnight. The values to the
left of the value at the centre are for the
afternoon, and the values to the right of
value at the centre are for the morning.
p The default values are "18:00" (start time)
and "6:00" (end time).
p The value can be changed in 15-minute
steps.
Adjusting the picture
You can adjust the picture for each source,
the Application screen, and rear view
camera.
CAUTION
For safety reasons, you cannot use some
of these functions while your vehicle is
in motion. To enable these functions, you
must stop in a safe place and apply the
handbrake.
1 Display the screen you wish to
adjust.
2 Press the HOME button to display
the Top menu screen.
3 Touch the following keys in the
following order.
The "System" screen appears.
4 Touch [Picture Adjustment].
5 Touch any of the following keys to
select the function to be adjusted.
Picture adjustment items are displayed.
Brightness:
Adjusts the black intensity.
Contrast:
Adjusts the contrast.
Colour:
Adjusts the colour saturation.
Hue:
Adjusts the tone of colour (which colour
is emphasised, red or green).
Dimmer Level:
Adjusts the brightness of the display.
Temperature:
Adjusts the colour temperature, resulting
in a better white balance.
p You can adjust Hue only when the colour
system is set to NTSC.
If you touch [Rear View] or [2nd
Camera], the mode changes to the
selected camera mode. By touching
[Source], [Navi] or [Apps], you can
return to the selected mode.
6 Touch the following keys to adjust
the selected item.
Decreases the level of the
selected item.
Increases the level of the
selected item.
Selects the adjustable previous
item.
Selects the adjustable next item.
Each time you touch the key, the level of the
selected item increases or decreases.
p "Brightness", "Contrast", "Colour"
and "Hue" can be adjusted from "-24" to
"+24".
p "Dimmer Level" can be adjusted from
"+1" to "+48".
p "Temperature" can be adjusted from "-3"
to "+3".
p The adjustments of "Brightness",
"Contrast", and "Dimmer Level" are
stored separately for the On/Off status of
the dimmer function. These are switched
automatically depending on whether the
dimmer function is on or off.
For details on setting the dimmer func-
tion, refer to Setting the dimmer function
on page 46.
p The picture adjustment may not be availa-
ble with some rear view cameras.
p The setting contents can be memorised
separately for the following screens and
video images.
— DVD, Video-CD and Disc
— AV
— USB (Video) and USB (JPEG)
— SD (Video) and SD (JPEG)
— iPod (iPod with a 30-pin connector)
— iPod (Video) and AppRadio Mode (iPod
with a 30-pin connector)
— HDMI and AppRadio Mode (HDMI)
— Android Auto
— MirrorLink
— AUX
— MIXTRAX, images output from the exter-
nal device
— Rear view camera
Displaying the firmware
version
1 Press the HOME button to display
the Top menu screen.
2 Touch the following keys in the
following order.
The "System" screen appears.
3 Touch [System Information].
4 Touch [Firmware Information].
The "Firmware Information" screen
appears.
p You can check the open source licences
of the functions that this product is
equipped with under "Licence" on the
"Firmware Information" screen.
Updating firmware
CAUTION
Never turn this product off, eject the SD
memory card or disconnect the USB
storage device while the firmware is
being updated.
You can only update the firmware when
the vehicle is stopped and the handbrake
is engaged.
p Use the USB port1 to update the firmware
using a USB storage device.
1 Download the firmware update
files.
Chapter
19
47
Engb
Advertisement
Table of Contents
