Paxar Handi Print 6017 Operating Instructions Manual page 28

For Wall-Mounting:
Use two screws or nails that support
1. Place the unfolded stand against the wall.
2. Use a pencil to mark inside the two keyholes for the
screws or nails.
3. Attach the screws or nails through the keyholes and
into the wall.
4. Slide the printer into the stand until the button
catches in the stand.
5. Adjust the height of the stand by moving the wire bar
into different grooves if you notice glare on the
handheld's display.
A-4 Specifications
Wall-mounting hardware is not
included.
at least 5 pounds (2.3 kg.).
Keyhole