Rear Panel - iControl iCamera 1000 User Manual

Rear Panel

LAN Port
Reset
Microphone
Use standard LAN cable (RJ45 connectors) to connect your PC to the
port. PoE (Power over Ethernet) function is supported.
This button has two (2) functions:
•
Reboot. When pressed and released, the iCamera will reboot
(restart).
•
Clear All Data. This button can also be used to clear ALL data
and restore ALL settings to the factory default values.
To Clear All Data and restore the factory default values:
1. Power On.
2. Keep holding the Reset Button down for 8 seconds.
Release the Reset Button. The iCamera is now using the factory default
values.
The built-in microphone is useful for bi-direction voice conversation.
3