Hitachi WM 10DBL Handling Instructions Manual page 9

CHARGER
Model
Charging voltage
Weight
STANDARD ACCESSORIES
In addition to the main unit (1), the package contains the
accessories listed in the table below.
1 Charger (UC10SL2 or UC10SFL) ....... 1
2 Battery (BCL1015) ............................... 2
WM10DBL
3 Plastic case .......................................... 1
(2LCSK)
4 Battery cover ...................................... 1
1 Charger (UC10SL2 or UC10SFL) ....... 1
2 Battery (BCL1030M) ........................... 2
WM10DBL
3 Plastic case .......................................... 1
(2LMSK)
4 Battery cover ...................................... 1
WM10DBL
Without charger, battery,
(NN)
plastic case and battery cover.
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES
(Sold separately)
1. Plus driver bit
Bit No.
No. 2
No. 3
2. Hexagonal socket
Part Name
5 mm Hexagonal socket
6 mm Hexagonal socket
5/16" Hexagonal socket
8 mm Hexagonal socket
Engraved characters
UC10SL2 / UC10SFL
10.8 V
0.35 kg
Code No.
992671
992672
Engraved
L B Code No.
characters
8 65 8 996177
10 65 10 985329
12 65 12 996178
13 65 13 996179
3. Drill chuck adapter set: Code No. 321823
Use drill bits available on the local market.
Optional accessories are subject to change without notice.
APPLICATION
Driving and removing of small screws, small bolts,
machine screws, wood screws, tapping screws, etc.
Drilling of various woods.
Drilling of various metals.
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch to
remove the battery (see Figs. 1 and 2).
CAUTION:
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
CHARGING
Before using the Electronic pulse driver, charge the
battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a
receptacle, the pilot lamp will blink in red
(At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it contacts
the bottom of the charger as shown in
Fig. 3.
3. Charging
When inserting a battery in the charger, the pilot
lamp will light up continuously in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red (At 1-second intervals).
(See Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
the rechargeable battery.
English
8