Download Print this page
Epson L850 Setup Manual

Epson L850 Setup Manual

Inkjet ink tank system mfp
Hide thumbs Also See for L850:

Advertisement

Quick Links

Setup Guide

NPD5106-00 EN

Advertisement

loading

Summary of Contents for Epson L850

  • Page 1: Setup Guide

    Setup Guide NPD5106-00 EN...
  • Page 2 Setup Guide Unpacking Unpacking Remove all protective materials. Close the scanner unit. Caution: Be careful not to trap your finger or hand when opening or closing the scanner unit; otherwise, you may get injured.
  • Page 3 Snap off the top of the cap, remove the cap of the ink bottle, remove the seal from the bottle, and then close the cap tightly. Caution: ❏ Use the ink bottles that came with your printer. ❏ Epson cannot guarantee the quality or reliability of non-genuine ink. The use of non-genuine ink may cause damage that is not covered by Epson’s warranties.
  • Page 4 Setup Guide Filling Ink Match the ink color with the tank, and fill with all of ink. Install the top of the cap to the cap of the ink bottle. Close the ink tank cap securely.
  • Page 5 Setup Guide Filling Ink Repeat the same steps to fill the rest of the ink tanks. Close the ink tank unit cover. Hook the ink tank unit onto the printer.
  • Page 6: Turning On The Printer

    Setup Guide Turning on the Printer Turning on the Printer Connect the power cable and plug it in. Note: Keep the printer away from direct sunlight or cooling and heating equipment. Turn on the printer and raise the control panel. Note: If an error message appears, turn off the printer and check that no protective material has been left inside the printer.
  • Page 7: Selecting A Language

    Setup Guide Selecting a Language Selecting a Language Select your language using the button and press the OK button.
  • Page 8 Setup Guide Charging Ink Charging Ink When the message of seeing the setup manual is displayed, press the OK button for 3 seconds. Press the button to start charging ink. Charging ink takes about 20 minutes.
  • Page 9: Loading Paper

    Setup Guide Loading Paper Loading Paper Make sure the home screen is displayed on the printer's screen. Open the rear paper feed cover and extend the paper support. Load A4 size plain paper vertically along the right side of the sheet feeder with the printable side facing up. Slide the side edge guides to the edges of the paper.
  • Page 10 Setup Guide Loading Paper Pull out the output tray.
  • Page 11 Setup Guide Information Information Do you know that you can influence the impact you have on the environment when printing? 1. The type of paper you use has an influence on the environmental impact of your printer. Choosing paper certified under environmental stewardship initiatives, such as EN 12281:2002, or carrying recognised ecolabels, can help reduce your impact on the environment through the initiatives the manufacturers implement.