Samsung SPD-3700T User Manual page 9

Warnings & Cautions
Cautions
Do not install under extreme
Only use in the temperature range of between -10ºC and
+50ºC to prevent low graphics quality and product
malfunction. When using in high temperature conditions,
provide good ventilation.
Do not drop the camera or subject
May cause product malfunctions.
The lens is the most important component of the camera.
Be careful not to smear it with fingerprints.
16
SPEED DOME CAMERA User's Manual
Do not install under unstable
Severe lighting changes or flickering may hinder normal
camera operation.
May cause critical damage to the CCD.
Do not install in a place that may be
Water leakage into the camera may cause damage.
Warnings & Cautions
Detailed Warnings and Cautions
- Avoid operating the camera for long durations under high temperatures and in high
- Do not install or place the camera near any heat sources.
leakage into it.
- Do not place the camera facing direct sunlight or other intense light sources. Strong lights
such as spotlights can cause distortions—blooming and smear—as well as discolorations
on the screen by heating up the color filter of the camera. They also may cause internal
reflections of the camera, leading to operational malfunctions.
damage to the camera.
from the power line, or earth an additional metal pipe to separate the camera from the
power source.
cause product malfunctions and shorten its lifespan.
an outdoor environment, use the outdoor housing.
- Avoid installing and operating the camera in the following places.
50;
magnetic waves.
Places in high humidity.
- Smeared and dusty dome covers decrease the picture and video quality. Clean the dome
cover and camera lens on a regular basis.
- Remove the plastic wrap on the dome cover only after the camera installation is complete.
- This camera is not equipped with a power switch. Plug in the camera only after the
installation is complete.
SPEED DOME CAMERA
; ~
17
User's Manual