Electrical Trouble Shooting; Power Up / Sign On / Communications - Paxar 656 / 636 User Manual

Electrical Trouble Shooting

Power Up / Sign On / Communications

Problem
Machine fails to power up with no
light present in the AC power
switch.
Machine fails to power up with light
present in the AC power switch.
Front panel displays no text or
nothing at all.
Users Manual Model 656/636
Probable Cause
1) Incorrect power amplitude.
2) Lack of power to machine.
3) Missing or blown fuse(s)
1) Unconnected cable / connector
inside machine.
2) Thermal Control Board unplugged
from the Mother Board
1) Front panel cable unplugged.
Corrective Action
1) Confirm that the AC entry is
configured for the line voltage
intended to be applied to the
machine. Failure to do so can
damage the machine's internal
power supply. Refer to the "Fuse
Configuration".
2) Check that both ends of the power
cord are plugged in securely.
2A) Confirm that the outlet the
machine is plugged into has power.
3) Check that the fuse(s) located
inside the AC entry are present and
intact. Replace as needed. Refer to
the "Fuse Configuration".
1) Power off and remove the power
cord from the AC entry. Remove
the back cover and inspect the
cables and connectors to and from
the power supply. Refer to the
"Electrical System Schematic".
2) Power off and remove the power
cord from the AC entry. Remove
the back cover and reseat the
Thermal Control Board.
1) Power off and remove the power
cord from the AC entry. Remove
the back cover and inspect the
cable and connectors to and from
the front panel. Refer to the
"Electrical System Schematic".
Electrical Trouble Shooting • 45